enPuls

The enPuls device delivers energy into the target tissue where traditional soft tissue therapy techniques cannot reach. This is all done with little or no stress on the therapist's hands. A heavy duty, ergonomic aluminum hand piece delivers optimal energy to the patient while providing optimal protection against vibrations to the therapist's hands. enPuls creates unique radial pulses by using a projectile 5 times heavier than standard air compressor systems and a reduced final velocity upon contact with the applicator. Though the force of the accelerator and the mass of the projectile are efficient down to the required depth, they are more comfortable for the patient than comparable systems. Energy is maintained by a longer pulse rise time. This eliminates the need for unpleasant high peak pressure amplitudes. The lower peak and longer rise time minimize the stinging and painful sensation that is normally associated with this type of therapy. Increased patient comfort results in easier treatments at higher energy levels, leading to successful therapy. The high mass applicator reduces strain on clinicians. The ergonomic aluminum hand piece with high mass and ample inertia provides appropriate energy transfer to the patient. It also affords optimal protection against vibration for the healthcare professional. The design allows for single handed use allowing the second hand to be free to adjust treatment parameters in session. Adding the enPuls Radial Pulse Therapy unit to your facility will decrease the treatment time for chronic soft tissue pain patients and increase your efficiency. This results in better outcomes for you and for your patients.

The enPulsPro device delivers energy into the target tissue where traditional soft tissue therapy techniques cannot reach. This is all done with little or no stress on the therapist's hands. A heavy duty, ergonomic aluminum hand piece delivers optimal energy to the patient while providing optimal protection against vibrations to the therapist's hands. enPulsPro creates unique radial pulses by using a projectile 5 times heavier than standard air compressor systems and a reduced final velocity upon contact with the applicator. Though the force of the accelerator and the mass of the projectile are efficient down to the required depth, they are more comfortable for the patient than comparable systems. Energy is maintained by a longer pulse rise time. This eliminates the need for unpleasant high peak pressure amplitudes. The lower peak and longer rise time minimize the stinging and painful sensation that is normally associated with this type of therapy. Increased patient comfort results in easier treatments at higher energy levels, leading to successful therapy. The high mass applicator reduces strain on clinicians. The ergonomic aluminum hand piece with high mass and ample inertia provides appropriate energy transfer to the patient. It also affords optimal protection against vibration for the healthcare professional. The design allows for single handed use allowing the second hand to be free to adjust treatment parameters in session. Adding the enPulsPro Radial Pulse Therapy unit to your facility will decrease the treatment time for chronic soft tissue pain patients and increase your efficiency. This results in better outcomes for you and for your patients.

The Handpiece contains a projectile that is accelerated through the electromagnetic transfer of kinetic energy. This kinetic energy is then transformed into impact energy in the applicator head. The impact energy delivered from the applicator head results in radial pulses in the target tissue.

Make the work environment neater with the Handpiece Holder. It conveniently holds the Handpiece for the enPuls device.

Silicone caps are specifically designed to be applied over the applicator head of the enPuls device's handpiece. It is necessary if the treatment requires using lotion. Protecting the applicator head while also allowing for optimal energy transfer to the patient. Set of 10.

Silicone caps are specifically designed to be applied over the applicator head of the enPuls device's handpiece. It is necessary if the treatment requires using lotion. Protecting the applicator head while also allowing for optimal energy transfer to the patient. Set of 25.

Silicone caps are specifically designed to be applied over the applicator head of the enPuls device's handpiece. It is necessary if the treatment requires using lotion. Protecting the applicator head while also allowing for optimal energy transfer to the patient. Set of 50.

The enPuls device is triggered using the 5 Pin Foot Pedal, ensuring targeted treatment and allowing the clinician to concentrate on hand positioning for the treatment.

The enPuls device is triggered using the 2 Pin Foot Pedal, ensuring targeted treatment and allowing the clinician to concentrate on hand positioning for the treatment.

Applicator heads of varying sizes and shapes can be quickly changed out without the use of tools, allowing treatments to be adjusted as needed. This one comes 6 mm in size.

Applicator heads of varying sizes and shapes can be quickly changed out without the use of tools, allowing treatments to be adjusted as needed. This one comes 15 mm in size.

Applicator heads of varying sizes and shapes can be quickly changed out without the use of tools, allowing treatments to be adjusted as needed. This one comes 25 mm in size.

enPuls Lotion is specifically designed to be used with the applicator head of the enPuls device. Once applied to the patient, it will allow for optimal energy transfer to the patient. Increasing the effectiveness of the soft tissue therapy session.

An optional aluminum transport case for the enPuls 2.0. It stores all equipment and accessories. Offering mobility and convenience for treatment anytime and anywhere.

The enPuls Pro SysCart has 2 hand piece holders to hold the 2 hand pieces of the enPuls Pro. The hand piece holders are removable and are attached to a Plexiglas shelf that hugs the back of the enPuls Pro unit. The Plexiglas shelf has a storage port for a lotion bottle and 7 ports to guide hand piece and foot switch cables to keep all cables nicely organized and out of the way. A storage rack underneath the Plexiglas shelf holds the foot switch when not in use.